Customer Support +8618814220505
TEG1120P-16-250W is a gigabit Unmanaged Ethernet PoE switch designed by Tenda. The switch provides 16 gigabit PoE ports, 2 uplink gigabit RJ45 ports and 2 SFP ports. It supports the IEEE 802.3af/at standard and can automatically detect PDs and supply power. The maximum output power of a single port is 30W, and the power of the whole switch is 250W. It supports rack mounting, one-toggle settings, plug and play, and simple networking. It is an ideal choice for SMBs, hotels, schools, and parks with video surveillance and wireless networking requirements.
Compliant with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z，IEEE802.3x, IEEE802.3af/at
16* 10/100/1000 Base-T Ethernet ports (Data/Power), 2 * 10/100/1000 Base-T Ethernet ports (Data), and 2 * 100/1000 Base-X SFP optical ports
8K MAC address and MAC address automatic learning
IEEE 802.3x full-duplex flow control and half-duplex backpressure flow control
40 Gbps non-blocking wire-speed forwarding backplane bandwidth
The maximum output power of the PoE port is 30 W. The maximum output power of the switch PoE port is 230W.
4 Mb large buffer design
Standard 1U height, rack mounted switch
| Network standards | IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3x IEEE 802.3af IEEE 802.3at |
| LED Indicator | Power Link/Act PoE MAX |
| Interfaces | (18)1GE RJ45 ports (2)1GE SFP ports |
| Transmission media | Recommended: CAT5/5e UTP or better |
| Fan quantity | 1 |
| Dimension | 440mm*178mm*44mm |
| Level of protection | Port: 6 KV Power：6 KV |
| Forwarding mode | Store-and-forward |
| Switch capacity | 40Gbps |
| Packet forwarding rate | 29.8Mpps |
| Buffer | 4Mb |
| MAC address table | 8K |
| PoE budget | Single port: AF: 15.4W, AT: 30W Whole device: 230W |
| Power consumption | 250W |
| Input voltage | 100-240V AC，50 / 60Hz |
| Mounting | Rack mounting : support Desktop mounting: support Wall mounting: support |
| Environment | Operating Temperature: 0℃~45℃ Storage Temperature: -40℃~70℃ Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing |
| Certification | FCC, CE, RoHS |
| Funtions | One-key to change network mode: 1.Standard: All ports can communicate with each other. It can be used as a common non-management PoE switch. 2.Priority: Ports 1 to 8 are high-priority ports, which greatly reduce packet loss and congestion when the network is congested. 3.Extend: The maximum transmission distance of the 9-16 ports of the switch can reach 250 meters, and all ports can communicate with each other. 4.VLAN: Ports 1 to 16 cannot communicate with each other, but can communicate with ports 17, 18, SFP1 (19), and SFP2 (20), which can be used to isolate broadcast storms and DHCP conflicts. |
admin - September 12, 2018
roadthemes